Discover > Answered Question
 |
DJ mixer voltage problem
|
I bought the Mixer (Pioneer DJM-300) in Japan (120v) and forgot about the conversion requirement and plugged it into 220v socket and now it won't turn on. Have opened the casing and found that there is a slot for a fuse but no fuse plugged in. I was just wondering what part i might have burned and how i might get it fixed. Will take it to techinician if need be but was hoping someone might shine some light on what this event might have done to the equipment. Thanks in advance :)
No Clarification Requests
Answer
|
User Rating:
 
Compliment Answer:
Answer Compliments:
0
|
You (hopefully) just blew the fuse. If there are no other fail safe device built in like a current over load protecting device you may have done all kinds of damage. Hopefully you just blew out some solid state circuitry in the power board. If you have opened any electronic device remember that large capacitors store high voltages than can cause serious shock or worse. If you take it to a technican he/she should be able to indentify the problem and take out the transformer and wire in a replacement one from another devi...
Answer Date: 08:28am 09/02/08
